SMOOTH SOUNDING
MORE FOR LESS
FIRE & FORGET

Real 400W RMS power capacity (8 hours pink noise)
Natural sound and incredible holographic reproduction
Optimized for smooth frequency response in and out axis
Premium custom made European Drivers
Proprietary 80ºx50º rotatable Elliptic horn
Birch plywood cabinet with tongue & groove assembly
Touring grade soft touch gloss-free black painting

APPLICATIONS

CT 12 loudspeaker system is suitable for near field main PA reinforcement with or without subwoofer, portable system or permanent installation, monitor in small stages, and delay fill.

Suitable for:

FoH
Multi-functional room
Auditorium and Theater
Pub
Bar

Commercial announcements

SPECIFICATIONS

Power Capacity (50~15000Hz pink noise 8 hours)	400W RMS / 800W Program
Nominal impedance	8 Ohm
Frequency response (-6dB half space, no EQ)	45~18000Hz
Manufacturing Consistency tolerance	±2dB from 300 to 10000Hz
Average Sensitivity	97dB/W/m (wideband 200~16000Hz)
Maximum Calculated SPL @ 1m	122dB continuous / 125dB Program
Nominal Directivity (-6dB)	80° x 50° above 1200Hz
Recommended low cut filter	40Hz 24dB/oct in full range mode 80-120Hz with subwoofer
Low Frequency driver	Custom made 12″ PAS driver Ferrite magnet, 3” In / Out Voice coil
High Frequency driver	Custom made 1” exit PAS driver Ferrite magnet, 1,7” Voice coil, 300 C° Polymer diaphragm
Crossover	Passive mode only 1900Hz, 12dB/oct on LF 18dB/oct on HF
Flying hardware	11 M8 points
Connectors	2x NEUTRIK Speakon® NL4MP (1+/1- Link, 2+/2- Input & Link)
Floor Monitor use	Yes, 2 symmetric angles
Pole mount	35mm top hat
Cabinet	CNC made with tongue and grove assembly 15mm birch plywood
Finish	Touring grade textured black mat rubberized coating
Size (WxHxD)	356x620x345 mm
Weight	21kg net, 26kg gross